Thursday, 28 February 2013

Stainless Steel Exhaust Piping Reducer 3.5" to 4"

Stainless Steel Exhaust Piping Reducer 3.5

Stainless Steel Exhaust Piping Reducer 3.5" to 4"



[else] [endif]
Stainless Steel Exhaust Piping Reducer 3.5

Stainless Steel Exhaust Piping Reducer 3.5

Stainless Steel Exhaust Piping Reducer 3.5" to 4"100% Brand New, Never Used or InstalledStainless Steel Exhaust Piping Reducer 3.5Inch to 4InchProfessional Installer Is Highly Recommend(No Instruction Included) ...Read more


Stainless Steel Exhaust Piping Reducer 3.5

Stainless Steel Exhaust Piping Reducer 3.5" to 4"100% Brand New, Never Used or InstalledStainless Steel Exhaust Piping Reducer 3.5Inch to 4InchProfessional Installer Is Highly Recommend(No Instruction Included) ...Read more



Stainless Steel Exhaust Piping Reducer 3.5

Stainless Steel Exhaust Piping Reducer 3.5
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Tuesday, 26 February 2013

Yamaha FZ1 Naked with Yoshimura TRC Full Exhaust System - OEM VS YOSHI

Yamaha FZ1 Naked with Yoshimura TRC Full Exhaust System - OEM VS YOSHI Tube. Duration : 1.25 Mins.


Yamaha FZ1 Naked with Yoshimura TRC Full Exhaust System - OEM VS YOSHI Never mind the noise, microphone is going crazy... and the system turns the FZ1 into a flamethrower! (c) Showoff Imports.nl

Sunday, 24 February 2013

1/4" 304/304L Welded Stainless Steel Tube .035" Wall - 5' Length

1/4

1/4" 304/304L Welded Stainless Steel Tube .035" Wall - 5' Length



[else] [endif]
1/4

1/4

Our welded Stainless Steel tubing is dual certified 304/304L A249/A269 mill finished ID bright annealed OD.

Cut tolerance is +/- 1/8".

Call for bulk orders greater than 100'. ...Read more


1/4

Our welded Stainless Steel tubing is dual certified 304/304L A249/A269 mill finished ID bright annealed OD.

Cut tolerance is +/- 1/8".

Call for bulk orders greater than 100'. ...Read more



1/4

1/4
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Friday, 22 February 2013

Moss Motors MGB Stainless Steel Replacement Exhaust System

Moss Motors MGB Stainless Steel Replacement Exhaust System Video Clips. Duration : 2.98 Mins.


Treat your MGB to the finest, most durable Sport Exhaust System available. The beautiful Tourist Trophy polished stainless steel muffler system is custom made for the 62-74.5 MGB using the highest quality materials and workmanship.

Thursday, 21 February 2013

1-7/8" 304/304L Welded Stainless Steel Tube .065" Wall 8' Length

target="_blank">1-7/8
1-7/8
==================================================================

1-7/8

Our welded Stainless Steel tubing is dual certified 304/304L A249/A269 mill finished ID bright annealed OD.

Cut tolerance is +/- 1/8".

Call for bulk orders greater than 100'. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


1-7/8

Our welded Stainless Steel tubing is dual certified 304/304L A249/A269 mill finished ID bright annealed OD.

Cut tolerance is +/- 1/8".

Call for bulk orders greater than 100'. ...Read more



==================================================================
1-7/8

1-7/8" 304/304L Welded Stainless Steel Tube .065" Wall 8' Length



1-7/8

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Tuesday, 19 February 2013

M103 goes like hell! without exhaust manifold

M103 goes like hell! without exhaust manifold Tube. Duration : 2.53 Mins.


Mercedes Benz engine M103, without exhaust manifold.

Sunday, 17 February 2013

3" Stainless Steel Mandrel Bend 45 Degree Elbow(3" Radius)

target="_blank">3
3
==================================================================

3

3" Diameter Stainless Steel Mandrel Bent 45 degree elbow with 6" legs. Centerline Radius 3" (super tight radius). 304 Grade / T304 SS, 16 Gauge (.065") corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


3

3" Diameter Stainless Steel Mandrel Bent 45 degree elbow with 6" legs. Centerline Radius 3" (super tight radius). 304 Grade / T304 SS, 16 Gauge (.065") corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards. ...Read more



==================================================================
3

3" Stainless Steel Mandrel Bend 45 Degree Elbow(3" Radius)



3

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Saturday, 16 February 2013

Lamborghini Gallardo with Maxflo Race Exhaust shooting flames

Lamborghini Gallardo with Maxflo Race Exhaust shooting flames Video Clips. Duration : 5.78 Mins.


2004-2005 Lamborghini Gallardo with primary catbypass pipes, Maxflo mufflers, and secondary bypass pipes. Dramatically improves exotic sportscar sound and performance while saving a considerable amount of weight from the rear of your Gallardo. Constructed from T304 stainless steel, CNC mandrel bent tubing for maximum power and sound. These products can be utilized together for a complete system or individually with the stock components for a tailored sound.

Thursday, 14 February 2013

Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco 44461 Gen-Turi RV Generator Exhaust Venting System


Model Of Item : 44461


[else] [endif]
Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco's RV Gen-Turi Generator Exhaust Venting System is designed for close quarters at RV rallies and tailgate the parties that create a need for noise as well as exhaust fume reduction. This Gen-turi diverts nasty fumes away from the ground, where they won't be inhaled by neighboring RVers. It directs generator exhaust above the roof line while reducing noise and weighs only nine pounds. This system is easy to install and disconnects quickly. ...Read more


Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco's RV Gen-Turi Generator Exhaust Venting System is designed for close quarters at RV rallies and tailgate the parties that create a need for noise as well as exhaust fume reduction. This Gen-turi diverts nasty fumes away from the ground, where they won't be inhaled by neighboring RVers. It directs generator exhaust above the roof line while reducing noise and weighs only nine pounds. This system is easy to install and disconnects quickly. ...Read more


Camco 44461 Gen-Turi RV Generator Exhaust Venting System

The Camco Gen-turi RV Generator Exhaust System is a venting system designed specifically for RV generators that provides for fresher air around RVs as well as reduces generator noise. The Gen-turi utilizes a tubing and coupling system to raise generator exhaust above the top level of your RV. It can be used with RVs utilizing virtually any exhaust pipes size by way of a variety of adapters. Additional features include: light weight design, a rubberized stabilizing/sound reduction system and a storage bag.

An artist's rendition of the Camco Gen-turi RV Generator Exhaust Venting System at work
Vent generator exhaust for cleaner air and quieter conditions.
View larger.

Reduce RV Generator Exhaust and Noise

RV generators are a popular and convenient tool for providing instant power when you on the road, but close quarters at rallies, tailgate parties and at campgrounds create a need for a reduction in the noise and exhaust fumes that they generate. This is where Gen-turi comes in. The Gen-turi is made specifically for use with RV generators,* when the vehicle is at rest. It diverts nasty fumes away from the ground, where they can be inhaled by neighboring RVers and campers, allowing you all your comforts while remaining a good neighbor. As generator exhaust is vented above the roof line of the RV and is also air cooled in a patented process.

Parts that come with the Camco Gen-turi RV Generator Exhaust Venting System
Everything you need, including a range of adapters, right out of the box.
View larger.
The Camco Gen-turi RV Generator Exhaust Venting System explained
Rising hot air draws in cooler air, diluting fumes and reducing noise.
View larger.
The Camco Gen-turi RV Generator Exhaust Venting System attaching to a RV generator exhaust pipe
Easy assembly and quick disassembly when it is time to hit the road.
View larger.

Dilution of fumes leads to less rattle that is often transferred to the vehicle body, and then the surrounding area, resulting in reducing noise all around. The Gen-turi is also conveniently light weight at only nine pounds, and comes with its own soft storage bag.

How it Works

Exhaust "noise" comes from two sources: vibration and the sound made by the actual gases leaving the exhaust pipe. Most manufacturers mount generators in a manner that uses some type of rubber material to isolate the vibration of the generator. Even though the Gen-turi is rigidly secured to the exhaust system, rubber straps are used to stabilize the Gen-turi to the coach. This prevents transferring the vibration noise of the generator system to the coach. As an added benefit, the noise made by the gases discharging from the generator exhaust pipe is diverted upward, above the roof line of the coach. As a result, in most installations, the exhaust system is actually quieter with the Gen-turi installed.

Compatibility

The Camco Gen-turi Air Cooled Generator Exhaust System is designed for near universal compatibility. With that in mind, it can be used with any recreational vehicle that utilizes an exhaust pipe with an outside diameter of 1", 1¼", 1⅜", 1½", 1⅝", 1¾", and 2". Adapters required for 1¼", 1⅜", and 1½" are included. These will accommodate most installations. Adapters required for 1", 1⅝", 1¾", and 2" may be purchased separately.

It is recommended that the Genturi exhaust pipe extend 6" above your RV's roofline. Genturi has an overall length of 120". Please measure your RV for compatibility.

Key Features

  • Vents RV generator exhaust up and away resulting in cleaner air for you and your neighbors
  • Rubberized Gen-turi bungee and eye straps work together to limit vibration and reduce noise
  • Minimal assembly required
  • Dissembles quickly when you are ready to hit the road
  • Wide range of adapters provided
  • Provided storage bag means no lost parts

What's in the Box

  • 1 - top tube
  • 1 - middle tube with coupling
  • 1 - lower tube w/stainless steel elbow
  • 1 - Gen-turi bungee with two S-hooks
  • 1 - Gen-turi storage bag
  • 2 - eye straps with 4 rivets and heavy-duty double-sided tape
  • 1 - wire lock pin (D-Clip)
  • 1 - 1½" muffler clamp
  • 1 - 1½" mounting adapter
  • 1 - 1¼" slotted bushing
  • 1 - 1½" mounting adapter
  • 1 - 1⅜" slotted bushing

About Camco Manufacturing

Located in Greensboro, North Carolina, Camco started in 1966 with one employee and one product. Today over 40 years later, they employ more than 350 employees and produce over 3,000 products in five manufacturing facilities. Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates, while their friendly, knowledgeable customer service staff stands ready to assist our customers with any questions.

*The Gen-turi should not be used on generators not specifically designed for and used in an RV.

...Read more


Camco 44461 Gen-Turi RV Generator Exhaust Venting System

Camco 44461 Gen-Turi RV Generator Exhaust Venting System
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Wednesday, 13 February 2013

Saxo VTS 1.6 16V 0-215 km/h

Saxo VTS 1.6 16V 0-215 km/h Video Clips. Duration : 1.15 Mins.


OZ Ultraleggera 7x15 Stock engine approx. 130-140 bhp, with airbox, manifold 4-2-1, 200cpsi cat, Ragazzon center tube, Kamracing exhaust. All parts in stainless steel.

Monday, 11 February 2013

Patriot Exhaust H7707 2" 304 Stainless Steel Exhaust Tubing

target="_blank">Patriot Exhaust H7707 2
Patriot Exhaust H7707 2
==================================================================




==================================================================
Patriot Exhaust H7707 2

Patriot Exhaust H7707 2" 304 Stainless Steel Exhaust Tubing


Model Of Item : H7707


Patriot Exhaust H7707 2

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Sunday, 10 February 2013

1969 Chevrolet Chevelle STK 1421

1969 Chevrolet Chevelle STK 1421 Tube. Duration : 3.78 Mins.


"America's most popular mid-size car" title is what the Chevrolet Chevelle/Malibu earned back in 1969 and by the looks of this '69 Chevelle SS if America were to be asked again and this bad boy was in the running, we here at Streetside Classic Cars believe it would take the title once again. With 81375 miles and a #'s matching big block under its hood, this "SS" is ready and willing to take you and your family or friends on many more miles of head-turning, driving fun. Taking this "heavy Chevy" down to our local cruising spots you notice a crowd forming and jaws dropping as you pull up in this stunning custom Vibrant Blue Metallic Chevelle SS that under certain lights, looks like a Deep Purple Metallic with Black Vinyl Roof (C08) and Black "SS" Stripes down its side. Coming from Chevrolet's Baltimore plant on the first week of February sporting Monaco Orange (72B) and the Black Vinyl Top, this color change is simply mind-blowing and with more than a few trophies under its belt, it was a good choice. Hearing the rumble that comes out of the Dual 2 1/2" Stainless Steel Exhaust with Chrome Tips (N10) makes your heart skip a beat as you lift the Double Domed Hood and the original big block (L35) 396ci V8 with 325hp is sitting there gleaming back at you at perfect idle. Mounted to the original TH-400 Automatic Transmission (M40) with column shift, this pristine Chevelle SS pulls hard and knows how to light up the 15x8" Rally Wheels with their BF Goodrich Radial TAs for those ...

Thursday, 7 February 2013

Patriot Exhaust H7709 2-1/8" 304 Stainless Steel Exhaust Tubing

Patriot Exhaust H7709 2-1/8

Patriot Exhaust H7709 2-1/8" 304 Stainless Steel Exhaust Tubing


Model Of Item : H7709


[else] [endif]
Patriot Exhaust H7709 2-1/8




Patriot Exhaust H7709 2-1/8

Patriot Exhaust H7709 2-1/8
==================================================================
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Getting Perfect Color Out of your Stainless Steel TIG Welds | TIG Time

Getting Perfect Color Out of your Stainless Steel TIG Welds | TIG Time Video Clips. Duration : 8.48 Mins.


www.weld.com Achieving good shiny color out of your Stainless Steel TIG welds can be a difficult task. Many times welders will walk away from their Stainless project feeling let down by a bad case of "the uglys", and believe me... it hurts! Even though an ugly weld does not always mean it is bad, who wants to have ugly TIG welds?! Well don't get to down on yourself. In this episode of TIG Time, Mr. TIG shows you some easy (and inexpensive) welding tips to show you how to weld Stainless with ease! This video is broken down into a few parts; The Intro, The Setup, Cup Choice and Final Results. Let's take a look at what he goes over in each part 1. The Intro -- 0:00 In the beginning of this episode Mr. TIG goes over some welding tips on how you can get better color simply by increasing your gas coverage. He goes on to show and explain which welding cups he will be using in this demonstration and what you might expect out of each of them. 2. The Setup -- 1:56 An automated track system is used to ensure that travel speed is constant throughout every weld done. This will ensure that there is no human error affecting the test. He also uses a 9 Style pencil torch for all welding. 3. 1st Cup (Standard #7 Cup) -- 2:30 The first cup demonstrated in this video is the Standard #7 Cup. As the torch moves along the plate Wyatt explains the settings and that the color with this torch is actually decent. It is not the best situation, but if it's all you have... It will get the job done ...

Monday, 4 February 2013

1.75" Stainless Steel Straight Tubing - 1 Foot (12")

target="_blank">1.75
1.75
==================================================================

1.75

1.75" Diameter Stainless Steel Straight Tubing, 1 foot (12") precut section. 304 Grade / T304 SS, 16 Gauge (.065") corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards. ...Read more
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.


1.75

1.75" Diameter Stainless Steel Straight Tubing, 1 foot (12") precut section. 304 Grade / T304 SS, 16 Gauge (.065") corrosion resistent tubing. Easy to cut and use to fab downpipes, exhaust systems, intake systems, and intercooler pipes. Made in USA to the highest quality standards. ...Read more



==================================================================
1.75

1.75" Stainless Steel Straight Tubing - 1 Foot (12")



1.75

CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Sunday, 3 February 2013

Joe Z Performance Exhaust Lexus LS460

Joe Z Performance Exhaust Lexus LS460 Tube. Duration : 0.97 Mins.


It's 100% 304 Polished Stainless Steel and all hand made in SoCal.. Just like the systems they've been making for the IS350 and IS-F, except that those are True Dual FULL systems..